Because every drop is valuable – the new cooking oil tester testo 270

With the testo 270, Testo AG launches the new generation of their proven cooking oil tester testo 270 onto the market. With it, the measurement technology specialist from the Black Forest enables the quality of cooking oil to be determined even faster. This ensures the quality of deep-fried foods, and reduces expenditure for cooking oil by up to 20 %.

The cooking oil tester testo 270 measures the Total Polar Material (TPM) content in the cooking oil, which is a sure indicator of its quality. This is the reason why the polar materials may not exceed a certain limit, depending on the country. Cooking oil develops its best potential between 14 and 20 % TPM. If the oil is too old, it shows an increased TPM value, and deep-fried goods of inferior quality are produced. It can furthermore contain substances which present a risk to health. Regular measurement with the testo 270 prevents this. The use of the measuring instrument also prevents the wastage of cooking oil due to too early replacement. It reduces cooking oil consumption by up to 20 %.

Safety in daily use

The strength of the probe shaft has been considerably improved over the previous model. In addition to this, the new cooking oil tester has more robust connections between the housing, the probe shaft and the sensor. Since the measuring instrument fulfils the protection class IP65 even without an additional protective case, cleaning it under running water is no problem – ideal for use in quick-service restaurants.

However the most obvious feature of the new testo 270 is its ergonomic design. This has the advantage that the user is no longer directly exposed to the the heat from the deep-fryer when taking the measurement, allowing him to work more safely.

Even more intuitive thanks to traffic light system

The measuring instrument's 86% larger display considerably simplifies the reading of temperature and TPM values. The unmistakeable alarm provided by multi-colour backlighting makes it even easier to evaluate the quality of the cooking oil: Green means that the TPM content is below the set limit value, orange is close to it, and when the display lights up red, the limit value has been exceeded.

Significantly reduces costs

Extensive practical tests by Testo engineers have demonstrated that regular measurementwith the testo 270 reduces the consumption of cooking oil by up tp 20 %. With a consumption of 1,000 litres per year and assuming a price of 0.70 € per litre, this allows 1,680 € to be saved annually.

Further information can be found at www.testo.com/en-IN.

Testo India Pvt. Ltd.

Plot No. 23, Sind Society,

Baner Road, Aundh,

Pune – 411007,

Maharashtra, India

Phone: +91 20 6560 0203

E-Mail: info@testoindia.com

Fax: +91 20 2585 0080

www.testo.com/en-IN.

Safe maintenance of electrical systems with thermal imagers from Testo

Operate electrical systems with the greatest possible security.

Faulty electrical connections or overload conditions in switching systems, electrical distribution boxes and electric drives can lead to costly production downtimes or even fire damage. The regular inspection of all electrical installations with a precise Testo thermal imager helps to minimize this risk of standstill. This allows anomalies to be identified reliably and effectively at a glance, and the required measures taken.

The challenge

Roughly 70% of all weak spots in electrical systems can be traced to faulty clamp connections. Due to aging, incorrect installation, mechanical load or damage to the system components, electrical energy is converted into heat, which can lead to dangerous overheating – with potentially catastrophic consequences: Machines can break down, production lines come to a standstill, or system components even burst into flames. Whether you wish to test transformers, electrical distribution boxes, switching systems or electric drives: Testo thermal imager models can be used on all electrical systems for localizing faulty electrical connections, for discovering asymmetrical load distribution or for identifying overload conditions of any kind. 

The solution

Testo thermal imagers show the surface temperature distribution of the measured electrical components at a glance. This allows weak spots to be identified quickly and early, before costly breakdowns can occur – faulty parts can be repaired or replaced. The great advantage of thermographic testing with Testo thermal imagers is that technical systems can be examined completely without contact. The continuing operation of the system to be tested therefore does not need to be interrupted.

The system availability is increased by regular inspections. Unplanned standstills and the risk of fire decrease. The highest possible level of security is guaranteed for the people working with the system, for the system itself and for the entire operation. The use of Testo thermal imagers also lowers the maintenance and energy costs of the whole system – by avoiding unexpected urgent repair work and by optimizing the quantities of energy used.

More information

More information and answers to all your questions concerning electrical thermography at www.testo.com/en-IN.

Efficient measurement and analysis of indoor climate with the VAC measuring instruments from Testo

The wide range of electronic instruments for the measurement of Indoor Air Quality available on the market reflects the many requirements in this area. Numerous parameters such as temperature, humidity, pressure or CO2 must be recorded, analyzed and documented. The professional groups carrying out measurements in the field of air conditioning and ventilation are equally varied: from contractors to plumbing, heating and air conditioning experts or plant constructors, up to expert appraisers or assessors. However,these users often apply only measuring instruments which are able to record one or two parameters belonging to their main activities. Yet especially those instruments which can measure almost all IAQ parameters support the efficient processing and management of the corresponding data. They would considerably facilitate work for all professional groups in air conditioning and ventilation technology.

The challenge

A plumbing, heating and air conditioning expert uses an infrared temperature measurement to check insulation work on a heating system. Complex documentation is not necessary, so that as a rule, an entry instrument is sufficient. However, as soon as commisioning, installation, inspection or maintenance of ventilation and air conditioning systems (VAC) is necessary, more complex measurements are often required. For example, if there is a lack of well-being in open-plan offices, it becomes necessary to analyze draughts, uncomfortable temperatures or fatigue due to high CO2 concentrations. Such measurements can take several hours or days, and cannot be managed with an entry instrument. It is recommended in such cases that professional measurement technology is used, which is able not only to measure many different parameters, but also to analyze and correspondingly document them for the customer.

The solution

Modern measuring instruments such as the VAC measuring instrument testo 480 have a high level of convenience for the user, as well as efficient analysis, processing and management of large quantities of data using PC software. They support the customer with integrated measurement programs which allow fast and standardized measurement. What makes them special is the large selection of digital probes which provide considerable advantages. On the one hand they appreciably extend the area of activity of the user. There is hardly an IAQ measurement which cannot be conducted. On the other hand, the probes produce a digital signal which is transferred to the measuring instrument completely without any loss of information, and free of error. The technical measurement intelligence is thus in the probe itself. This means it can be calibrated even without using a portable instrument, avoiding downtime costs and substantially simplifying the entire calibration process. testo 480 with its probes fulfils numerous standards such as grid measurement of a VAC system according to EN 12599. The technician is prepared for everything, works quickly, obtains error-free measurement results and can present them to his customer directly on site. The customer can be certain that the technician conducts all relevant measurements and can adjust the VAC system according to the standards. And not only that, people have a greater sense of well-being, and it has been proven that they perform better at the workplace when the indoor climate is right. In addition to this, an efficiently adjusted system can avoid high energy costs. That saves the customer money.

More information

More information and answers to all your questions concerning IAQ analysis measuring instruments at www.testo.com/en-IN.

Testo 816-1 -Sound level measurement with integrated data storage

The testo 816-1 sound level meter is ideal for measuring sound level at workplaces, industrial and production halls, and public places.  The measuring instrument can be switched from Slow (1 sec.) to Fast (125 ms) with the touch of a button. Additionally, it is also facilitated to switch between the frequency weighting characteristic curves A (corresponds to the sound pressure sensitivity of the human ear )and curve C (for evaluating low-frequency components of a noise) and vice versa. ation of testo 816-1. The integrated data store allows the storage of over 30000 measurement values in the instrument, these can be administered using the software included in delivery. In addition to this, the software allows online measurements over a longerperiod to be carried out. With the optional sound calibrator and the adjustment accessory included with it, the testo 816-1 can be re-calibrated on site.

Features-

•          Backlit display

•          Bar graph display

•          Frequency weighting A and C

•          Sound level measurement acc. to IEC 61672-1 class 2 and ANSI S1.4 Type 2

•          Integrated data storage for up to 31000 measurement values

•          can be switched from Slow (1 sec.) to Fast (125 ms)

•          Software for data management and long term measurement

•          AC and DC output for the connection of other instruments

•          On site calibration with the optional sound calibrator

Making your utility and maintenance tasks easier with sound level and RPM measuring instruments

Sound level measurement:

You often need an instrument that can be used for monitoring sound level measurements in the areas of air conditioning or heating, on combustion plants or at workplaces. Machine or discotheque noise can also be evaluated quickly and precisely with testo sound level measuring instrument testo 815 or testo 816. This dB meter is the ideal instrument for the evaluation of sound level in everyday work. Using the Fast/slow button, the measurement time can be set from 1 s to 125 ms, in order to better evaluate the noise source. The frequency analysis can also be switched from characteristic curve A to C. The characteristic curve A corresponds to the sound pressure perception of the human ear, whereas characteristic curve C can also evaluate the low-frequency components of a sound. With the help of the optional calibrator, the measuring instrument can be recalibrated directly on site with the screwdriver provided. The wind protection cap included in delivery ensures correct measurement results when measuring outdoors and if required can protect the microphone from dirt and dust. The testo 816 also has an AC and DC output. Via the AC output, recorders or amplifiers can be connected directly to the instrument, and via the DC output, graphical recorders or data loggers can be used easily and directly on site.

RPM measurement:

For non-contact RPM measurement, with the testo 465, you can measure rpm easily without contact using only one hand. The measuring instrument is thus suitable for measurements on rotating parts such as ventilators and shafts. Simply attach a reflective marker (optional) to the measurement object, point the visible red beam of light at the reflective marker, and measure.

Whereas for non contact and mechanical RPM measurement, the rpm measuring instrument testo 470, which can be operated with one hand, offers an optimum combination of optical and mechanical rpm measurement. By simply attaching an adapter for a probe tip or a speed disc, the optical measurement becomes a mechanical one. This allows speeds and lengths to be measured additionally.
The high light-intensity hand stroboscope testo 476 is used when it is necessary to make fast-moving objects appear in slow motion. The hand stroboscope-Pocket Strobe measures and tests rotation and vibration movements. It allows the measurement of very small objects, or in places which are not directly accessible – and it does this without interrupting the production process! The testo 476 is thus optimally suitable for rpm measurements and for the inspection of components moving at high frequencies. The testo 477 LED hand stroboscope too is used for high revolutions. 

For more info, click here or write to us at info@testoindia.com