The easy way to optimum measurement
results in all flow velocity ranges.
In order for air conditioning and
ventilation systems to run smoothly and efficiently, the flow velocity in the
ventilation duct must be regularly checked. Only when the flows in the duct
correspond to the requirement are the room loads (heat, cold and substance
load) reliably transported away – and the indoor air quality is right.
If the ventilation duct is accessible, duct
measurement is then the best solution. This is because air flows are measured
most accurately directly in the duct. However, it must be taken into account
that the flows in the duct are usually non-homogenous and turbulent.
In order to obtain reliable results in
spite of this, measurements should always be taken at several points over the
duct cross-section. In these grid measurements, the mean flow velocity is
calculated from the individual measurement values.
Ventilation measuring instruments from
Testo support you in grid measurement just as reliably as in the automatic
calculation of volume flow.
Which instrument suits your application
depends on the flow velocity range you wish to measure.
Lower flow velocity range up to 5 m/s
Thermalanemometer testo 425 (0 to 20 m/s)
Our accuracy champion in the flow velocity
range from 1 to 5 m/s. With fixed telescopic flow velocity probe up to 820 mm
length for duct measurement.
Thermalanemometer testo 405i (0 to 30 m/s)
Work comfortably thanks to operation
completely via testo Smart Probes App. Easy report creation and data dispatch
by e-mail.
Thermalanemometer testo 405 (0 to 10 m/s)
Particularly accurate in the range between
0 and 2 m/s Equipped with 300 mm telescopic probe. Automatically calculates the
volume flow.
Medium flow velocity range from 5 m/s
Vaneanemometer testo 416 (0.6 to 40 m/s)
Our accuracy champion in the flow velocity
range from 5 m/s. Telescope length up to 890.
Differentialpressure measuring instrument testo 420 (-120 to +120 Pa)
Measures flow velocities up to 14 m/s in
combination with a Pitot tube or a flow velocity matrix.
Medium to high flow velocity range from 40 to 100 m/s, as well as highly
contaminated flows
Differential pressuremeasuring instrument testo 510 (-100 to +100 hPa)
Compact and with integrated display.
Differentialpressure measuring instrument testo 510i (-150 to +150 hPa)
Controlled by your smartphone. Reports
easily created and sent via testo Smart Probes App.
For more details please visit our
website www.testo.com/en-IN or contact us on bellow address:
Testo India Pvt.
Ltd.Plot No. 23, Sind Society, Baner Road, Aundh, Pune – 411007 Maharashtra, India
Phone: +91 20 6560 0203
E-Mail: info@testoindia.com
Fax: +91 20 2585 0080
No comments:
Post a Comment