The NEW Cooking Oil Tester Testo 270- Because Every Drop is Valuable

Use of cooking oil which is too old for deep-frying produces inferior quality of food. It may also contain substances which present a risk to health. On the contrary, too early replacement of cooking oil causes wastage.

With the launch of new generation of the proven cooking oil tester testo 270 you can now inspect the quality of cooking oil for producing healthy food even faster. The cooking oil tester testo 270 measures the Total Polar Material (TPM) content in the cooking oil, which is a sure indicator of its quality with best potential of cooking oil between 14 and 20 % TPM. Regular measurement with the testo 270 prevents the use of oil which is too old along with preventing the wastage of cooking oil due to too early replacement thus ensuring the quality of deep-fried foods, and reducing expenditure for cooking oil by up to 20 % and therefore saving cost!

The new cooking oil tester has more robust connections between the housing, the probe shaft and the sensor along with considerably improved probe shaft strength over the previous model. In addition to this, the measuring instrument also fulfils the protection class IP65 even without an additional protective case which makes cleaning it under running water possible – ideal for use in quick-service restaurants. The ergonomic design of the new testo 270 offers an added advantage to the user by avoiding direct exposure to the heat from the deep-fryer while taking the measurement, allowing more safety.

The 86% larger display of the new testo 270 considerably simplifies the reading of temperature and TPM values along with the unmistakeable alarm provided by multi-colour backlighting which makes it even easier to evaluate the quality of the cooking oil; Green means that the TPM content is below the set limit value, orange is close to it, and when the display lights up red, the limit value has been exceeded. 

Ventilation and Air Conditioning Measurement Technology from Testo

VAC measuring instruments from Testo provide the highest level of precision from 0.01 m/s to 9999 m3/h. For any air conditioning and ventilation professional, measuring flow velocity accurately is not easy. Whether for the precise determination of volume flow, quick spot measurements in ducts or recording turbulent flows at outlets – without suitable measuring instruments, it is impossible to ensure optimum indoor air in residential and non-residential buildings

For this reason, Testo offers the optimum solution for every measurement task and measurement range: whether thermal probes, vane anemometers, differential pressure measuring instruments or multifunction instruments. Our patented flow straighteners provide added precision, even in turbulence at outlets. Find information now on how to measure flow velocity more efficiently.

Accurate measurement in ducts

You obtain the most accurate results when you measure directly in the duct. To compensate non-homogenous flows, a grid measurement is recommended. For this purpose, you determine the flow velocity values at several points in the duct cross-section, enter the cross-section dimensions – and your ventilationmeasuring instrument from Testo calculates the mean value and the volume flow for you automatically and reliably.

Precise measurement at outlets

If the ventilation duct is inaccessible, the measurement takes place directly at the outlet. In adjustment work too, the air input and output is tested where the air flows into the room. However, turbulent flows at swirl and plate outlets can severely falsify your measurement results. For this reason, we recommend the use of funnel measuring instruments with a flow straightener (testo 420, testo 417 set 2).

Multifunctional measurement in ducts and at outlets

Multifunction measuring instruments give you as a VAC professional maximum flexibility. The multifunction VAC measuring instruments testo 435-4 and testo 480 can be extended with various probes. In addition to flow velocity, volume flow, temperature and humidity, you measure absolute and differential pressure, light intensity, radiated heat, degree of turbulence and CO2 concentration – with only one instrument.

Testo India Pvt. Ltd., a 100% subsidiary of Testo AG, Germany was founded in 2006 in Pune. The company has established thirteen home offices in major metros and a dealers’ network covering this enormous country.

Testo AG is a world leader in the design, development and manufacturing of portable test and measuring instruments. Testo has also become a major supplier for HVAC industries, refrigeration, airflow and environmental monitoring instruments for markets as diverse as chemical, steel, power, cement, food and beverages, pharmaceuticals, biotech etc. Today, Testo consists of 2500 employees, 31 subsidiaries and 80 sales & service partners in other 43 countries.